If you recently purchased an older home and suspect that it may have some electrical issues, you might want to hire a residential electrician to perform an electrical inspection on the home. Approximately 28,600 fires occur in homes each year from faulty electrical systems, and you may be able to prevent a fire in your house by making a few changes. Here are three things an electrical inspection will reveal in your home.
Older homes may have aluminum wiring or knob and tube wiring, and both types are outdated and may be hazardous in a home. An electrician will easily be able to tell if your home has either of these types by inspecting the electrical panel. If you have either type, the electrician is likely to suggest rewiring the entire house.
Unfortunately, rewiring a house can be very costly, especially if the house is big. A medium-sized house may cost $8,500 to $20,000 for this job, and that includes materials and labor. This is a considerably high investment to make, but it might be the only way to make your house safe.
A second thing the electrician will look at during an electrical inspection is the ground protectors in the house. These are normally referred to as GFCIs and should be located by all sources of water. A GFCI looks like a regular outlet, but it is designed to immediately stop the flow of electricity if an electrical device touches water.
GFCIs are there for safety purposes, and an electrician will suggest adding them to your home if your home does not currently have them. The cost to do this is typically between $160 to $237 per outlet.
Another common part of an electrical inspection is examination of the detectors in a home. This includes smoke detectors and carbon monoxide detectors. If your home uses any type of gas, it should have at least one carbon monoxide detector in it. Carbon monoxide is an odorless gas that can be deadly.
Smoke detectors should strategically be placed in numerous areas of a home, and these are designed to alert you if temperatures rise too much in your house or if smoke is detected. Your inspection will reveal if you have enough detectors in your home and if they are located in the right locations. Adding a few detectors to your home is not usually overly costly, and this is something you can do on your own.
If you want to make sure your house is safe, get an electrical inspection today. This is the best way to locate potential problems and make the necessary changes. For more information, contact Sun Coast Electric & Networking Inc. or a similar company.